Rain Bird PGA Solenoid Valves 9 Volt complete with 9 volt DC latching solenoid coil. Use this solenoid valve only with battery controllers.
Rain Bird PGA Solenoid Valves 9 Volt are built for high-end residential, landscaping, plant borders and lawn applications, Rain Bird® PGA series valves are the toughest, most reliable valves in their class. These long-lasting, easy-to-service valves are proven to perform at the highest level, even under harsh temperatures and intense pressure. For maximum peace of mind, PGA series valves also offer a best-in-class, three-year trade warranty.
The PGA valve maintains a strong, worry-free seal between the body and bonnet, no matter the conditions. In Thermal Cycle Testing, hundreds of PGA valves were exposed to extreme temperature swings and intense pressures. The result—zero leaks.*
Pressure-Resistant Seal The PGA valve’s body-to-bonnet seal is built to overcome the intense water pressure common on many commercial sites. Faced with repeated pressure surges well into the triple digits, our valves outlasted the nearest competitor more than 2½ times to 1 in Cycle Surge Testing.*
Easy Maintenance Multi-drive screws make servicing the PGA valve simple. With the option of flathead, Phillips or hexagonal, you have the freedom and convenience you need to get things done faster.*Currently available on 2” PGA models only.
Quiet Performance With a robust electrical design, the PGA valve greatly reduces noise and delivers years of reliable performance. So not only will you have peace of mind, you'll have peace and quiet.
*Based on 2013 testing conducted at Rain Bird's Product Research Facility in Tucson, AZ.
Rain Bird PGA Solenoid Valves 9 Volt Sizes Available
1" Inlet PGA Solenoid Valve,
1 1/2" Inlet PGA Solenoid Valve,
2" Inlet PGA Solenoid Valve,
Replacement 9Volt DC Latching Coil
Rain Bird PGA Solenoid Valves 9 Volt Features
Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions
Robust construction and electrical design for quiet performance you can count on
Filtered pilot flow to resist debris and clogging
Slow closing to prevent water hammer and subsequent system damage
Normally closed, forward flow design Accepts latching solenoid for use with Rain Bird battery-operated controllers
Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance
Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service