Rain Bird Landscape Valve Boxes are used to hide your solenoid valves and taps under the ground in safety. A well installed valve box will have its surface at ground level. These Rain Bird valve boxes have green lids so you can install one in the lawn and have it reasonably camouflaged, and are constructed of polypropylene. The sides of the valve box are pre-cut for the pipes to enter and exit. There is a built-in hole in the lid so you can lift it off easily. These Rain Bird Landscape Valve Boxes are sturdy but are not designed for heavy machinery such as tractors to drive over them. If this is the case, use our Rain Bird heavy duty boxes instead.
All Rain Bird Valve Boxes were engineered to maintain their horizontal and vertical integrity under load, even with the knock-outs removed.
Other unique features include a bolt hole knock-out to help keep critters out of the box when the locking bolt isn't used and a shovel access slot on the side of the box that makes it easy to remove the lid.
Rain Bird Landscape Boxes Size
7 Inch Round Valve Box- Bottom Diameter: 8.4 inches (21.4 cm) x Height: 9.2 inches (23.4 cm)
10 Inch Round Valve Box-Bottom Diameter: 11.8 inches (30,0 cm) x Height: 10.2 inches (26,0 cm)
Standard Valve Box- Length: 23.2 inches (59.0 cm) x Width: 19.3 inches (49.1cm) x Height: 12.5 inches (31.8 cm)
Standard Extension-Length: 20.0 inches (50.8 cm) x Width: 14.75 inches (37.5 cm) x Height: 6.75 inches (17.1 cm)
Jumbo Valve Box- Length: 27.6 inches (70,0 cm) x Width: 21.0 inches (53,2 cm) x Height: 12.5 inches (31.6 cm)
Jumbo Extension- Length: 24.4 inches (62.0 cm) x Width: 17.9 inches (45.5 cm) x Height: 6.75 inches (17.2 cm)