Rain Bird Micro Sprinkler Tube Fittings

Rain Bird Micro Sprinkler Tube Fittings are used to connect 6mm (¼”) Distribution Tubing in different configurations or attach 6mm (¼”) tubing to 12mm (½”) or 19mm (¾”) tubing. The Rain Bird Micro Sprinkler Tube Fittings help to create micro sprinkler line connections of the 6mm tubing around the garden plant borders and plant pots.

The design of the connectors now have self-piercing barbs that easily puncture ½” or ¾” tubing and made from rugged plastic construction.

Stem on fittings allows simple, quick installation using Emitter Xeriman Tool (XM-TOOL).

Rain Bird Micro Sprinkler Tube Fitting Types Available

• Micro tubing barb connector -1/4″ (6mm) barbed straight-through connector. Use this to join two 6mm tubes together; also use it to connect a 1/4″ (6mm) tube into your poly pipe (the sharp end in the photo is designed for pushing through the hole you have made in the wall of the irrigation feeder tube). 
• Micro tubing barb elbow- 1/4″ (6mm) barbed elbow. Use this to go around sharp bends; also use it to connect a 6mm tube into your poly pipe (the sharp end in the photo is designed for pushing through the hole you have made in the wall of the irrigation feeder tube). Therefore you can insert this into the irrigation pipe and then have 2 pieces of 6mm tube going off to 2 different emitters. 
• Micro tubing barb tee - 1/4″ (6mm) barbed tee. Use this to join three 6mm tubes together; also use it to connect a 6mm tube into your poly pipe (the sharp end in the photo is designed for pushing through the hole you have made in the wall of the irrigation feeder tube). Therefore you can insert this into the irrigation pipe and then have 2 pieces of 6mm tube going off to 2 different emitters. 
• Micro Tubing Goof Plug - Used to plug unwanted holes in drip tubing that are 1/4″ (6mm).